Hydra Control Units

Description

Create the ultimate Hybrid Heating System

Inta Hydra is a new hybrid solution for homes which currently have a working combi-boiler installed. You can install an energy-efficient heat pump without removing your existing combi-boiler and without adding a hot water storage tank. Current hybrid system methods can prove to be too expensive and require too much space.

When an Air Source Heat Pump cannot provide heat, the Inta Hydra allows the original combi-boiler to operate, providing constant heating, even during the coolest temperatures.

When the heating demand becomes greater than the heat pump can meet, the Hydra’s programmable control monitor will, after a series of timed-out delays, revert to using the combi-boiler for heating the home.

It only does this when the heat pump is not delivering enough heat, and it doesn’t go back to the combi-boiler just because it’s cold outside.

The electronic controller allows the installer to set the operation to match the operating COP (coefficient of performance) with 4 profiles,

PROFILE 1: The factory default, to BS EN 14511 return temperature of 40°C

PROFILE 2: For Low COP ASHP operation

PROFILE 3: For High COP ASHP operation

PROFILE 4: Allows a full 24-hour day on gas boiler room heating when demand is high, more suitable for older less well insulated properties

Inta Hydra will allow a heat pump installation that retains the existing boiler installation.

The key to the patent pending (Patent publication GB2633750) control logic is focused around clever delay time outs and temperature monitoring which allow the heat pump to engage all its operational functions like defrost and weather compensation without compromise, while providing protection from any conflict with unnecessary use of the secondary heat source, namely the combination boiler.

COST EFFECTIVE: Add to an existing heating system, rather than replacing a functioning boiler

SMART HYBRID CONTROL:Switches from ASHP to boiler to maintain heating supply only when necessary

REQUIRED LITTLE SPACE: At just 50 x 50cm, it can be easily concealed within a small kitchen unit

Products

ProductCode
HYDRA CONTROL UNIT G1 - M - Standard assembly, motorised valve for isolating the ASHP provided by the installerHCU0100-M
HYDRA CONTROL UNIT G1 – A (WITH ACTUATED VALVE) - Full flow actuated ball valve includedHCU0100-A
HYDRA CONTROL UNIT G1 - C (WITH x2 ACTUATED VALVES) - For ASHP with cooling functionHCU0100-C

No documents currently available.

Search Intatec.co.uk

Russia-Ukraine Statement

The condemnation and imposition of sanctions on Russia and Belarus in response to Russia’s military invasion of Ukraine will have enormous implications and an impact on global trade, particularly on commodities, for years to come. The effect of the war on the building material supply in the UK is still to be determined. However, the region including Russia, Ukraine and Belarus accounted for only 1.25% of building products imported into the UK last year.

Intatec Limited is committed to ensuring that products which we supply are not manufactured using any material sourced in Russia or Belarus.