Heat Pump Installer Packs

Building regulations Part L states that all external pipework on an Air Source Heat Pump System must be fully insulated to reduce heat loss and maintain system efficiency.

Inta Zero Anti-Freeze Valves have been specifically designed to quickly and accurately react to the water temperature in the heat pump circuit and do not need the influence of the
ambient temperature to operate. Inta Zero Anti-Freeze Valves will still maintain correct operation and discharge the water at the same temperature even when a system is correctly insulated. The Inta Zero has been designed and engineered to avoid negative influences from low ambient temperatures by directly positioning the element in the system water flow, permitting accurate system discharge only when it is truly needed.

In systems where every watt counts, Inta’s pre-insulated hoses have been designed for external use to prevent heat losses and to help maintain the COP and SCOP of the system, preventing losses of energy, contributing to an efficient system and preventing higher costs to run than expected. The UV & water resistant finish prevents the insulation from absorbing water and moisture which could result in an unintended outcome of the insulation becoming a conductor for heat loss.

Heat Pump installer packs contain:
2 x Heat pump ball valve
2 x Ball valve insulation
2 x Inta Zero anti-freeze valve
2 x Anti-freeze insulation
2 x ZEROGUARD
2 x Heat pump hose with elbow 500mm (Pack of 2),
2 x Adaptor
1 x Tube of Bond & Seal